There are several methods by which you can request the analysis of samples and obtain quotations for our services:
|
Using our Celignis Database:
|
We provide a user-friendly online system for placing and modifying orders and requesting quotations. By registering for this online database you will also be able to view and sort the analytical data using a web browser, with several graphical representations of the data also provided. Click here for instructions on how to use this database. |
By Email:
Give us a Call:
|
We can be reached between the hours of 9am-6pm (GMT) at (+353) 61 518 440 or outside these hours at (+353) 89 455 5582. |
Using the form below:
|
Enter your query and we will get right back to you.
|
|
Click
here to see the steps involved in placing an order with Celignis.
Our address for sample delivery is:
Celignis Limited
Unit 11 Holland Road
Plassey Technology Park
Castletroy
Limerick
Ireland
V94 7Y42
Sample Requirements
The main requirements for sample analysis are outlined below, if you require further detail please contact us at
sales@celignis.com.
|
Amount of Sample: Click here to see a table outlining the minimum weight requirements for each analysis package.
Particle Size: The infrared and chemical anaysis of samples requires them to be well ground, with a particle size of less than 850 microns (0.85mm). If your sample is not ground to this specification then we will need to carry out some sample preparation work (Celignis Analysis Package P1). The cost of this will depend on the amount of sample that needs to be processed and the original state of the material.
We recommend that you specify whether the sample is a bulk solid (for example, a block of wood), a chopped material (with particle size greater than 0.85mm), or a ground material with a particle size less than 0.85mm. This information can be provided in your email, on the Order Form, or using the Celignis Database.
The analysis of moisture content does not require samples to be ground or prepared in any way.
Moisture: We can accept delivery of wet samples. However, for all analysis packages except P2 (Moisture Content), we will need to air-dry these samples prior to other stages of sample preparation and chemical/infrared analysis. The cost of this will be included in Celignis Analysis Package P1 (Sample Preparation) and will depend on the amount of work involved for each sample.
If you plan to send wet samples to us, please ensure that these are kept in air-sealed containers (bags, boxes etc.) so that the moisture content will not be lost during delivery.
If you plan to dry the samples yourself, please ensured that this is carried out at room-temperature (air-drying). This may take several days for some samples and will require them being periodically turned to ensure that the drying is uniforn. Do not use an oven to dry samples since this can result in the loss of some volatile components.
|